NEWDi E93
The E93 GNSS receiver removes barriers to portability without sacrificing performance. Featuring full GNSS technology, it offers best-in-class GNSS signal tracking even in a harsh environment, enabling GNSS surveying beyond usual constraints. The E93 GNSS incorporates the latest innovations such as an inertial module providing automatic pole-tilt compensation in a very compact design.
Connected to a GNSS RTK network via NEWDI Geofix field software, or combined with the M1 GNSS receiver, the E93 GNSS is a highly productive rover for surveying and stakeout in any topographic, mapping or construction site applications.
THE ULTIMATE POCKET IMU-RTK GNSS RECEIVER
Extremely rugged to cope with challenging environments.The E93’s magnesium alloy design makes it one of the lightest receivers in its class: only 0.73 kg including battery. It is more than 40% lighter than a typical GNSS receiver, making it more convenient to carry, use and operate without fatigue.
THE POWER of GNSS + IMU TECHNOLOGY
The E93 compensates for up to 45 ° tilt of the survey range pole, eliminating the challenges associated with surveying concealed or unsafe points to reach. It increases the efficiency of point measurements by 20% and stakeout surveys by up to 30%.
Get full power with 15 hours of battery operationThe integrated high-capacity intelligent Li-ion battery provides up to 15 hours operation in the field. Full-day projects can be easily completed without worrying about a power outage. The built-in USB-C is extremely convenient for charging the i73, using standard smartphone chargers or external power banks
Specification
GNSS Characteristics
- 624 channels with all in view simultaneously trackedsatellite signals
- GPS: L1, L2, L5
- GLONASS: L1, L2
- BDS: B1, B2, B3
- Galileo: E1, E5a, E5b
- QZSS: L1, L2, L5
- SBAS: L1
- Advanced multipath mitigation technology
- Low noise carrier phase measurement
GNSS Accuracies
- Real Time Kinematics (RTK):
- Horizontal: 8 mm + 1 ppm RMS
- Vertical: 15 mm + 1 ppm RMS
- Initialization Time: < 10 s
- Initialization Reliability: > 99.9%
- Post-processing Static:(Static)
- Horizontal: 3 mm + 1 ppm RMS
- Vertical: 5 mm + 1 ppm RMS
- Post-processing Kinematics(PPK)
- Horizontal: 3 mm + 1 ppm RMS
- Vertical: 5 mm + 1 ppm RMS• Code Differential
- Horizontal: 0.4m RMS
- Vertical: 0.8m RMS
- Autonomous
- Horizontal: 1m RMS
- Vertical: 1.5m RMS
- Time to first fix
- Cold start: < 45 s
- Hot start: < 30 s
- Signal re-acquisition: < 2 s
- RTK tilt-compensated
- Additional horizontal pole-tilt uncertainty typically less than 10mm +0.7mm/° tilt
- Raw data updating: up to 10Hz
Hardware
- Size: 119mm×119mm×85mm(4.7 in x 4.7 in x 3.3 in)
- Weight: 0.73 kg with battery (1.61 lb)
- Environment
- Operating: -45°C to +75°C (-49°F to +167°F)
- Storage: -55°C to +85°C (-67°F to +185°F)
- Humidity: 100% condensation
- Dust and Water Proof: IP67
- Shock and Vibration: Survive a 2-meter pole drop
- Tilt sensor: Calibration-free IMU for pole-tilt compensation. Immune to magnetic disturbanc
- Front panel: 4 LED indicates
Communications
- Bluetooth: BT 4.0
- Wi-Fi: 802.11 b/g/n, access mode
- UHF Radio:
- Protected TNC Female
- Standard Internal Rx/Tx 5KM: 430 MHz to 470 MHz
- Link rate: 9600/bps/19200/bps
- Protocol: CHC, Transparent, TT450
- External Tx DL6: 5 W to 28 W adjustable
- Data formats:
- CMR input and output
- RTCM2.x, RTCM3.x input and output, NEMA 0183 output
- HCN, HRC RINEX 2.11, 3.02
- Ports:
- 1 x USB type-C port(data download, charging, firmware update)
- 1 x UHF antenna port(TNC female)
- Data Storage: 8 GB high speed memory,128 GB extpendable
- Others: NFC
Electrical
- Power Consumption: 4W (depending on receiver configuration)
- Li-ion Battery Capacity: Built in non-removable battery6800mAh, 7.4V
- Operating Time (2):
- RTK Rover: 12hStatic: up to 15h
Software (Standard)
- Geofix Android field data collection software
For inquiries contact us
Like and follow our facebook page at Philinstruments Corp.