Model 101 P2 Water Level Meter
The Model 101 P2 Water Level Meter uses high quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well. Heat embossed marking each millimeter or 1/100 ft. allow accurate readings. The 3/8″ (10 mm) wide tapes come in lengths up to 1000 ft. (300 m).
Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.
M2 Feet and tenths: with markings every 1/100 ft.
M3 Meters and centimeters: with markings every mm
Solinst Polyethylene Tape Design
- Dog bone design prevents tape from clinging to sides of well
- Permanent heat-embossed markings are easy-to-read
- Non-stretch tape uses 7 strands of stainless steel in each conductor
- Marked every 1/100 ft or each mm
- Easy to repair tape
The P2 Water Level Meter Probe is shielded in design to reduce or eliminate false readings in cascading water. The probe consists of a stainless steel body with a neoprene heat shrink seal. It is not suitable for submergence to any significant depth. Its simple design makes it easy to repair.
Size: 0.55″ dia., 7.5″ long (14 mm x 190 mm)
Weight: ~7 ounces (200 g)
Tape Guide / Datum
A tape guide is provided with each Meter. It protects the tape from damage on rough edges of well casing and ensures easy, consistent measurements, regardless of who takes the readings. It can also provide reel support on the casing.
For inquiries contact us
Like and follow our facebook page at Philinstruments Corp.