Storm 3 Data Logger
The Storm 3 is a mid-range data logger with an ideal cost-toperformance ratio. Communicate through GOES satellite and cellular modems using a balanced set of inputs for analog, digital I/O and SDI-12 smart sensors. Easily configure and collect data using the browser-based graphical user interface with all standard web browsers on PCs, tablets and smart phones.
Application
Accurately monitor hydrological, meteorological, industrial control, storm and waste water.
Key Features
- GOES compatible
- Simple and intuitive browser-based Graphical User Interface (GUI)
- Direct connect or wireless (Wi-Fi) connection for the GUI interface
- Library-based sensor setup options
- Built-in help menus
- Two USB 2.0 compliant host ports (thumb drives and Wi-Fi adaptor)
- GSM and CDMA compatible
- One USB 2.0 compliant device port (communications)
- Low profile extruded aluminum case fits small spaces
- Wiring does not interfere with I/O labels
- Removable terminal strip connectors
- Power and Activity LEDs for visual indication of operation
Specification
Measurement
- Analog Inputs
- Channels : 4 single ended
- Accuracy: ±0.025% FS
- Range: 0.0 to 5.0 Volts (0.0001 to 4.998V)
- +5.0 Volt Excitation
- Accuracy: ±5.0 mV over load and temperature range
- Current: 10 mA Max load
- Switched +12.0 Volt Excitation
- Type: Unregulated based on battery voltage
- Current: 250 mA Max load, protected by resettable fuse
- Digital I/O
- Channels: 4 general purpose digital I/Os
- Modes:
- Digital Input
- Counter Input
- Conditional output
- Counter frequency (100Hz Max)
- Input Levels
- 0.0 to 5.0 Volts
- High = 3.5 Volts or higher
- Low = 0.08 Volts or less
- Output Levels
- High = 3.5 Volts Min sourcing 5mA
- Low = 0.4 Volts Max sinking 5 mA
- SDI-12
- Mode : SDI-12 master mode V1.3 compliant
- Connector: 3-pin Connector
- RS232
- Type: Single RS-232 configured as a DTE device
- Connector: 9-pin D connector, male
- Baud Rate: Programmable
- RS-485
- Type: Single RS-485 port
- Connector: 4 position screw terminal
Memory
General
- Data Storage Capacity
- 256 MB
Communication
USB
- Type
- 2 host USB-A connectors
- 1 device Mini-B connector
- Version
- USB Version 2.0
Cell Modem
- Type
- GSM
- CDMA
Wifi
- Type
- 150Mbps wireless 802.1 1b/g/n
External Satellite
- Type
- GOES/METEOSAT/INSAT H-2221-V2
Power
Requirements
- Voltage Input
- 10.0 to 16.0 Volts reverse voltage protected
- Current
- Standby: 3.5 mA Max
- Active: 50.0 mA Typical
- Current with Internal Modem
- Standby: 4.5 mA Max
- Active: 100 mA Typical
Connection
- Connector
- 2 position screw terminal
Environmental
General
- Operating Temperature
- -40 ° to +60 ° C
- Storage Temperature
- -50 ° to +80 ° C
Physical
Size
- Housing
- 11.09 cm L x 6.22 cm W x 18.73 H (4.37 in. L x 2.45 in. W x 7.375 in. H)
Weight
- Shipping
- 1kg (2lbs)
Material
- Housing
- Extruded aluminum
Warranty
WARRANTY The Storm series of data loggers are warranted against defects in materials and workmanship for two years from the date of shipment. For complete terms and conditions, visit http://www.ysi.com/terms-andconditions.php
Note: For detailed specifications, see user manual. Specifications subject to change without prior notice due to on-going commitment to product testing and improvements. LR June 2016 (D15-10 0616)
Browser-Based GUI Data Logger
The Storm 3 Data Logger incorporates a balanced set of inputs for analog, digital I/O and SDI-12 smart sensors to allow communication through cellular modems and GOES satellite. You’ll love how easy it is to configure and collect data using the browser-based graphical user interface (GUI) with all standard web browsers on PCs, tablets and smart phones.
PRODUCT FEATURES
The Storm 3 data logger has emerged faster, smarter and more specifically designed for today’s technological advances while maintaining simplicity and ease of use.
- Built-in Sensor Library
- Browser-based Graphical User Interface (GUI)
- Direct or Wireless Connection for GUI
Add the Storm 3 to your collection to create the ultimate hydrological or meteorological system, producing data you can rely on 24/7.
You can also view your password-protected and public data anywhere with internet access using our cloud hosted data solution Storm Central. Pair the HydroSphere Data Collection Platform with the Storm 3 data logger and you’ve got one mean data-collecting machine that you can access anytime, anywhere.
For inquiries contact us
Like and follow our facebook page at Philinstruments Corp.